Leviton QuickPort Decora Insert, 6-Port, 41646-W, White

I used a few of these to replace existing plates because they offer far greater customization than the usual pre-built ones you get on various wall plates. I used these for HDMI, COAX and network jacks to outfit my tv wall plates with all the plugs I needed to get things connected. I did have an issue with one plate where the metal screw port popped out of the plastic, but it happened because I mounted my tv over it and HDMI cables were pinched so tight it was pushing too hard on the wall plate. This was resolved by moving the tv over slightly, but I did have to purchase a new Keystone plate. Other than that, they fit great in existing setups and the keystones all fit snugly inside.

Sure- you can buy keystone wallplates all day long and there are tons of brands, but at the end of the day these are STRONG and are made to very tight tolerances. This is from experience - had two different 6 port keystones that I could not get 3x HDMI, 2xLAN, and 1x Optical Cable keystones to fit properly - or if they did, the plastic flexed so badly when putting pressure on the ports that the keystones would just pop right back into the gang. Switching to the Leviton cost me a few bucks more but the keystone jacks snapped in with a very solid click and didn't move around at all once installed. For my 2 port jacks it was not as bad but when you start cramming in 6 ports to a single gang it can be problematic - with the Leviton I have no complaints.

Used to make custom wall panel for telecom/network.

It's a decent wall plate, but this doesn't fit CableMatters keystones side by side. Might need to use Panduit or thinner keystones in order to get a proper fit. It'll work for now, until I can fimd a 4 or 6 port wallplate.

I was skeptical getting this after reading some reviews. Was afraid my keystones wouldn’t fit nicely with this plate. But for 5 bux, I’d figured id give it a shot and I’m glad I did. Works nothing short of perfect with Cable Matters shielded Cat6a keystones. Thusly, works perfectly with the 2, 3 and 4 port versions as well. Can’t speak intelligently about other keystones though. If you have the above mentioned keystone, don’t hesitate to get these. Saved me some work having to cut into my wall and add more low voltage brackets/keystone plates.

Definitely a speciality Product

Good name-brand part, perfect fit for what I needed.

These dont fit any keystones and are a huge pain